Skip to content
New tools on the shelf. Dull tools reground. What's a regrind cost? Run your numbers →
New tools on the shelf. Dull tools reground. What's a regrind cost? Run your numbers →

The full catalog

Every SKU we grind, on the shelf or not.

The whole catalog, including tools that are out of stock right now. These are made here in Wichita, so an empty shelf is a timing problem, not a dead end. If your spec shows out of stock, ask. Only want what ships today? See what's on the shelf.

PERFORMER · UNCOATED PERFORMER ELITE · TISAFLEX Two series. What changed? The coating changeover, right below.

The coating changeover

Two coatings are becoming one better one.

We're consolidating every coated line we stock to TISAFLEX, an AlTiN/TiSiXN coating by Oerlikon Balzers, under one series name: Performer Elite. One coating that covers the ground Alcrona EVO and Futura Nano used to split between them. Fewer decisions at the spec stage, same carbide underneath.

same tools,one coating
PERFORMER Uncoated carbide

Aluminum & non-ferrous. The aluminum line doesn't change: sharp, uncoated carbide, same as always.

PERFORMER ELITE TISAFLEX (AlTiN/TiSiXN) · by Oerlikon Balzers

Everything else. Steels, cast iron, stainless, titanium, high-temp alloys: one coating in place of two.

Changeover clearance
The changeover, honestly: every Alcrona EVO and Futura Nano tool on this page is changeover stock, and while it lasts it's 50% off, applied automatically at checkout. No code to enter: prices shown are list, the discount comes off at checkout, and it's an online-only deal. When it's gone, it's gone. The geometry isn't going anywhere: it comes back under Performer Elite, coated TISAFLEX.
Last run:won't be restocked
And a few slow movers (some uncoated Performer sizes, a handful of TISAFLEX) won't be restocked once they sell through. We'd rather put the carbide into tools that work for a living than tools that sit on a shelf. Still run one? We'll grind it for you as a custom: same geometry, made to order, kept on file.

And when any of these dull: every standard tool on this page regrinds off the published sheet, sharpened, recoated, back in the rack. That's the program.

See regrind pricing See how regrinds work

All Products

EM-34541625030-TiAlN carbide end mill | Star Tool Inc Sold out
$290.28 - $290.28
$290.28
$290.28 - $290.28
$290.28

3/4" x 5 Fl x 4" OAL x 1-5/8" LOC w/ .030 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/4" Flutes - 5 Overall Length - 4" Length of Cut - 1.625" Radius - .030 Coating - TiAlN

$290.28 - $290.28
$290.28
$290.28 - $290.28
$290.28
Sold out
EM-34552250030-TiAlN carbide end mill | Star Tool Inc Sold out
$371.50 - $371.50
$371.50
$371.50 - $371.50
$371.50

3/4" x 5 Fl x 5" OAL x 2-1/4" LOC w/ .030 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/4" Flutes - 5 Overall Length - 5" Length of Cut - 2.250" Radius - .030 Coating - TiAlN

$371.50 - $371.50
$371.50
$371.50 - $371.50
$371.50
Sold out
EM-38431125CHMF-TiAlN carbide end mill | Star Tool Inc Changeover clearance · Nano
$78.06 - $78.06
$78.06
$78.06 - $78.06
$78.06

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ Corner Chamfer & Futura Nano Coating | Carbide End Mill

Star Tool Inc
7 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - Corner Chamfer Coating - TiAlN

$78.06 - $78.06
$78.06
$78.06 - $78.06
$78.06
Changeover clearance · Nano
EM-38431125030-TiAlN carbide end mill | Star Tool Inc Sold out
$80.56 - $80.56
$80.56
$80.56 - $80.56
$80.56

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ .030 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - .030 Coating - TiAlN

$80.56 - $80.56
$80.56
$80.56 - $80.56
$80.56
Sold out
EM-38431125060-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$80.56 - $80.56
$80.56
$80.56 - $80.56
$80.56

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ .060 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - .060 Coating - TiAlN

$80.56 - $80.56
$80.56
$80.56 - $80.56
$80.56
Changeover clearance · Nano
EM-38431125BN-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$85.56 - $85.56
$85.56
$85.56 - $85.56
$85.56

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ B/N & Futura Nano Coating | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - Ball Nose Coating - TiAlN

$85.56 - $85.56
$85.56
$85.56 - $85.56
$85.56
Changeover clearance · Nano
EM-58541625030-TiAlN carbide end mill | Star Tool Inc
Sold out
$221.14 - $221.14
$221.14
$221.14 - $221.14
$221.14

5/8" x 5 Fl x 4" OAL x 1-5/8" LOC w/ .030 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 5/8" Flutes - 5 Overall Length - 4" Length of Cut - 1.625" Radius - .030 Coating - TiAlN

$221.14 - $221.14
$221.14
$221.14 - $221.14
$221.14
Sold out
EM-1443750090 carbide end mill | Star Tool Inc
$38.85 - $38.85
$38.85
$38.85 - $38.85
$38.85

1/4" x 4 Fl x 3" OAL x 3/4" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 1/4" Flutes - 4 Overall Length - 3"  Length of Cut - 0.750" Radius - .090 Coating - Uncoated

$38.85 - $38.85
$38.85
$38.85 - $38.85
$38.85
EM-38331125010 carbide end mill | Star Tool Inc
$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96

3/8" x 3 Fl x 3" OAL x 1-1/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
10 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3" Length of Cut - 1.125" Radius - .010 Coating - Uncoated

$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96
EM-38331125120 carbide end mill | Star Tool Inc
Sold out
$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96

3/8" x 3 Fl x 3" OAL x 1-1/8" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 3 Overall Length - 3" Length of Cut - 1.125" Radius - .120 Coating - Uncoated

$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96
Sold out
EM-38431125010 carbide end mill | Star Tool Inc
Sold out
$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - .010 Coating - Uncoated

$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96
Sold out
EM-38431125090 carbide end mill | Star Tool Inc
$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
7 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - .090 Coating - Uncoated

$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96
EM-38431125120 carbide end mill | Star Tool Inc
Sold out
$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 4 Overall Length - 3" Length of Cut - 1.125" Radius - .120 Coating - Uncoated

$66.96 - $66.96
$66.96
$66.96 - $66.96
$66.96
Sold out
EM-383351500010 carbide end mill | Star Tool Inc
$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

3/8" x 3 Fl x 3.5" OAL x 1-1/2" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
2 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3.5" Length of Cut - 1.500" Radius - .010 Coating - Uncoated

$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06
EM-384351500SQ carbide end mill | Star Tool Inc
$75.06 - $75.06
$75.06
$75.06 - $75.06
$75.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - Square Corner Coating - Uncoated

$75.06 - $75.06
$75.06
$75.06 - $75.06
$75.06
EM-384351500010 carbide end mill | Star Tool Inc
Sold out
$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .010 Coating - Uncoated

$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06
Sold out
EM-384351500030 carbide end mill | Star Tool Inc
$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
10 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .030 Coating - Uncoated

$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06
EM-384351500060 carbide end mill | Star Tool Inc
Sold out
$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .060 Coating - Uncoated

$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06
Sold out
EM-384351500120 carbide end mill | Star Tool Inc
Sold out
$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .120 Coating - Uncoated

$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06
Sold out
EM-384351500BN carbide end mill | Star Tool Inc
$85.06 - $85.06
$85.06
$85.06 - $85.06
$85.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ B/N | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - Ball Nose Coating - Uncoated

$85.06 - $85.06
$85.06
$85.06 - $85.06
$85.06
EM-12431250190 carbide end mill | Star Tool Inc
$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95

1/2" x 4 Fl x 3" OAL x 1-1/4" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
16 in stock

Diameter - 1/2" Flutes - 4 Overall Length - 3" Length of Cut - 1.250" Radius - .190 Coating - Uncoated

$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95
EM-12341625010 carbide end mill | Star Tool Inc
$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81

1/2" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
30 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .010 Coating - Uncoated

$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81
EM-12341625190 carbide end mill | Star Tool Inc
$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81

1/2" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .190 Coating - Uncoated

$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81
EM-12441625190 carbide end mill | Star Tool Inc
Sold out
$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81

1/2" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 1/2" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .190 Coating - Uncoated

$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81
Sold out
EM-123351500SQ carbide end mill | Star Tool Inc
$113.87 - $113.87
$113.87
$113.87 - $113.87
$113.87

1/2" x 3 Fl x 3.5" OAL x 1-1/2" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3.5" Length of Cut - 1.500" Radius - Square Corner Coating - Uncoated

$113.87 - $113.87
$113.87
$113.87 - $113.87
$113.87
EM-123351500190 carbide end mill | Star Tool Inc
$117.62 - $117.62
$117.62
$117.62 - $117.62
$117.62

1/2" x 3 Fl x 3.5" OAL x 1-1/2" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
16 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3.5" Length of Cut - 1.500" Radius - .190 Coating - Uncoated

$117.62 - $117.62
$117.62
$117.62 - $117.62
$117.62
EM-124351500SQ carbide end mill | Star Tool Inc
Sold out
$110.12 - $110.12
$110.12
$110.12 - $110.12
$110.12

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 1/2" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - Square Corner Coating - Uncoated

$110.12 - $110.12
$110.12
$110.12 - $110.12
$110.12
Sold out
EM-124351500010 carbide end mill | Star Tool Inc
Sold out
$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 1/2" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .010 Coating - Uncoated

$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87
Sold out
EM-124351500030 carbide end mill | Star Tool Inc
Sold out
$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 1/2" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .030 Coating - Uncoated

$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87
Sold out
EM-124351500090 carbide end mill | Star Tool Inc
Sold out
$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 1/2" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .090 Coating - Uncoated

$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87
Sold out
EM-124351500120 carbide end mill | Star Tool Inc
$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
2 in stock

Diameter - 1/2" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .120 Coating - Uncoated

$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87
EM-124351500190 carbide end mill | Star Tool Inc
$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 1/2"  Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .190 Coating - Uncoated

$118.87 - $118.87
$118.87
$118.87 - $118.87
$118.87
EM-124351500BN carbide end mill | Star Tool Inc
$116.87 - $116.87
$116.87
$116.87 - $116.87
$116.87

1/2" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ B/N | Carbide End Mill

Star Tool Inc
9 in stock

Diameter - 1/2" Flutes - 4 Overall Length - 3.5" Length of Cut- 1.500" Radius - Ball Nose Coating - Uncoated

$116.87 - $116.87
$116.87
$116.87 - $116.87
$116.87
EM-58341625010 carbide end mill | Star Tool Inc
Sold out
$201.24 - $201.24
$201.24
$201.24 - $201.24
$201.24

5/8" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 5/8" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .010 Coating - Uncoated

$201.24 - $201.24
$201.24
$201.24 - $201.24
$201.24
Sold out
EM-58341625190 carbide end mill | Star Tool Inc
$201.24 - $201.24
$201.24
$201.24 - $201.24
$201.24

5/8" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 5/8" Flutes - 3 Overall Length - 4" Length of Cut - 1-5/8" Radius - .190 Coating - Uncoated

$201.24 - $201.24
$201.24
$201.24 - $201.24
$201.24
EM-58441625010 carbide end mill | Star Tool Inc
Sold out
$198.74 - $198.74
$198.74
$198.74 - $198.74
$198.74

5/8" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 5/8" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .010 Coating - Uncoated

$198.74 - $198.74
$198.74
$198.74 - $198.74
$198.74
Sold out
EM-58441625190 carbide end mill | Star Tool Inc
$198.74 - $198.74
$198.74
$198.74 - $198.74
$198.74

5/8" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
10 in stock

Diameter - 5/8" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .190 Coating - Uncoated

$198.74 - $198.74
$198.74
$198.74 - $198.74
$198.74
EM-58441625250 carbide end mill | Star Tool Inc
$198.74 - $198.74
$198.74
$198.74 - $198.74
$198.74

5/8" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .250 R | Carbide End Mill

Star Tool Inc
13 in stock

Diameter - 5/8" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .250 Coating - Uncoated

$198.74 - $198.74
$198.74
$198.74 - $198.74
$198.74
EM-34341625010 carbide end mill | Star Tool Inc
$263.83 - $263.83
$263.83
$263.83 - $263.83
$263.83

3/4" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 3/4" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .010 Coating - Uncoated

$263.83 - $263.83
$263.83
$263.83 - $263.83
$263.83
EM-34341625190 carbide end mill | Star Tool Inc
$263.83 - $263.83
$263.83
$263.83 - $263.83
$263.83

3/4" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 3/4" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .190 Coating - Uncoated

$263.83 - $263.83
$263.83
$263.83 - $263.83
$263.83
EM-34441625010 carbide end mill | Star Tool Inc
$258.83 - $258.83
$258.83
$258.83 - $258.83
$258.83

3/4" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .010 R | Carbide End Mill

Star Tool Inc
9 in stock

Diameter - 3/4" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .010 Coating - Uncoated

$258.83 - $258.83
$258.83
$258.83 - $258.83
$258.83
EM-34441625190 carbide end mill | Star Tool Inc
$258.83 - $258.83
$258.83
$258.83 - $258.83
$258.83

3/4" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 3/4" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .190 Coating - Uncoated

$258.83 - $258.83
$258.83
$258.83 - $258.83
$258.83
EM-34352250SQ carbide end mill | Star Tool Inc
$334.10 - $334.10
$334.10
$334.10 - $334.10
$334.10

3/4" x 3 Fl x 5" OAL x 2-1/4" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 3/4" Flutes - 3 Overall Length - 5" Length of Cut - 2.250" Radius - Square Corner Coating - Uncoated

$334.10 - $334.10
$334.10
$334.10 - $334.10
$334.10
EM-34352250060 carbide end mill | Star Tool Inc
Sold out
$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10

3/4" x 3 Fl x 5" OAL x 2-1/4" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/4" Flutes - 3 Overall Length - 5" Length of Cut - 2.250" Radius - .060 Coating - Uncoated

$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10
Sold out
EM-34352250090 carbide end mill | Star Tool Inc
$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10

3/4" x 3 Fl x 5" OAL x 2-1/4" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 3/4" Flutes - 3 Overall Length - 5" Length of Cut - 2.250" Radius - .090 Coating - Uncoated

$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10
EM-34352250190 carbide end mill | Star Tool Inc
Sold out
$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10

3/4" x 3 Fl x 5" OAL x 2-1/4" LOC w/ .190 R | Carbide End Mill

Star Tool Inc
Out of stock

Diameter - 3/4" Flutes - 3 Overall Length - 5" Length of Cut - 2.250" Radius - .190 Coating - Uncoated

$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10
Sold out
EM-34352250250 carbide end mill | Star Tool Inc
$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10

3/4" x 3 Fl x 5" OAL x 2-1/4" LOC w/ .250 R | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 3/4" Flutes - 3 Overall Length - 5" Length of Cut - 2.250" Radius - .250 Coating - Uncoated

$339.10 - $339.10
$339.10
$339.10 - $339.10
$339.10
EM-34452250SQ carbide end mill | Star Tool Inc
$324.10 - $324.10
$324.10
$324.10 - $324.10
$324.10

3/4" x 4 Fl x 5" OAL x 2-1/4" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
9 in stock

Diameter - 3/4" Flutes - 4 Overall Length - 5" Length of Cut - 2.250" Radius - Square Corner Coating - Uncoated

$324.10 - $324.10
$324.10
$324.10 - $324.10
$324.10

Don't see it, or need it today?

The catalog is everything we grind. If your tool isn't here, we'll make it. If you need it now, shop the shelf.

In stock right now

Shop what's on the shelf

The Ready to Ship collection lists only tools that are physically here. When something sells out, it drops off that page until it's back. No waiting on a grind.

Shop in-stock tools →

Not in the catalog at all

Have the exact tool ground

Send a print, a sketch, or the tool itself. We grind the exact one, keep it on file for reorders, and quote its regrind price up front, on the original quote. One tool is a real order.

Send a print →