STAR TOOL REGRINDS · PUBLISHED RATES · IN WRITING
Regrind pricing.
Read it before you ship.
Standard rates, published for anyone. Any brand, no account required. These prices cover standard tools. Specials regrind at the price quoted with the tool, kept on its file.
See how regrinds workAny brand · no contracts · no minimums
End mill regrinds. Seven standard prices. That's the whole list.
Any brand. Square corner, radius, or ball nose. Any flute count. End only or complete grind: the price is the diameter. Measure the shank, read the number, done.
| MAX DIAMETER | REGRIND - ANY END MILL |
|---|---|
| up to 1/4″ | $11.25 |
| up to 3/8″ | $13.25 |
| up to 1/2″ | $17.00 |
| up to 5/8″ | $21.25 |
| up to 3/4″ | $25.25 |
| up to 1″ | $27.75 |
| up to 1-1/4″ | $35.50 |
Every price includes: cut-off of damaged ends · your geometry put back to original spec · measured and labeled with diameter, radius.
SQ · RAD · BN, same priceANY FLUTE COUNT, same priceANY BRAND
Carbide drill resharps. Six standard prices. Same deal.
Any brand. Standard points reground to spec. Your price is the diameter. Same rates structure, same deal as your end mills.
| MAX DIAMETER | RESHARP - ANY CARBIDE DRILL |
|---|---|
| up to 1/4″ | $15.00 |
| up to 3/8″ | $17.00 |
| up to 1/2″ | $21.50 |
| up to 5/8″ | $23.50 |
| up to 3/4″ | $27.75 |
| up to 1″ | $30.75 |
Every price includes: a fresh, true point reground to spec · measured and labeled with diameter. Bigger than 1″, step drills, specials: send them anyway, we'll quote before we grind.
ALL STANDARD POINTS, same priceANY BRANDHSS? WE DO THOSE TOO
Add a recoat by Oerlikon Balzers
Alcrona EVO or TISAFLEX, one price either way. Priced by diameter and overall length, added to the regrind price above. Same matrix for end mills and drills.
| MAX DIA. | OAL 2″ | 3″ | 4″ | 5″ | 6″ | 7″ | 8″ | 10″ | 12″ |
|---|---|---|---|---|---|---|---|---|---|
| 1/8″ | $5.00 | $6.50 | $7.75 | $9.25 | $11.00 | $12.50 | $13.50 | $16.50 | $31.25 |
| 1/4″ | $10.00 | $13.25 | $15.50 | $19.00 | $22.00 | $24.50 | $27.75 | $33.75 | $36.50 |
| 3/8″ | $10.75 | $14.75 | $19.00 | $22.50 | $25.75 | $29.00 | $36.75 | $52.50 | $55.75 |
| 1/2″ | $13.25 | $18.25 | $23.75 | $28.25 | $33.25 | $38.50 | $48.25 | $58.25 | $70.75 |
| 5/8″ | $14.50 | $19.50 | $24.25 | $30.25 | $36.00 | $42.25 | $51.25 | $60.00 | $71.50 |
| 3/4″ | $17.75 | $23.25 | $28.75 | $35.25 | $41.75 | $47.75 | $57.00 | $70.00 | $81.25 |
| 1″ | $22.25 | $30.75 | $38.75 | $44.25 | $49.50 | $55.00 | $61.75 | $76.75 | $106.00 |
Example: a 1/2″ × 4″ carbide drill, resharp + recoat = $21.50 + $23.75 = $45.25. One line on the invoice, one sharp drill back on your shelf. Longer or bigger than the chart? Send it and we'll quote before we grind.
Take the list with you.
Print it or keep it on file. It's the same list either way.
Run your numbers on the savings calculator →Running volume? Ask about program rates.
Shops that send steady volume get their own price sheet: same format, their rates, reviewed yearly. The published list is the ceiling, never the floor.
Every tool you send comes back sharpened if it could be, unground if it couldn't, and you're only invoiced for the tools we actually ground. Published rates cover standard tools; specials are quoted with the tool and kept on file.
Every tool you send comes back to you (sharpened if it could be, unground if it couldn't), and you're only ever invoiced for the tools we actually ground.