Skip to content
The Regrind Box standard: any brand, back sharp in 14 business days. Get your free box. Run your numbers →
The Regrind Box standard: any brand, back sharp in 14 business days. Get your free box. Run your numbers →

Ready to Ship

If it's on this page, it's on the shelf.

In-stock carbide, ground in Wichita. This collection only lists tools that are physically here. When one sells out, it drops off until it's back. Need a SKU that isn't showing? Browse the full catalog. Out of stock isn't discontinued.

PERFORMER · UNCOATED PERFORMER ELITE · TISAFLEX

The coating changeover

Two coatings are becoming one better one.

We're consolidating every coated line we stock to TISAFLEX, an AlTiN/TiSiXN coating by Oerlikon Balzers, under one series name: Performer Elite. One coating that covers the ground Alcrona EVO and Futura Nano used to split between them. Fewer decisions at the spec stage, same carbide underneath.

same tools,one coating
PERFORMER Uncoated carbide

Aluminum & non-ferrous. The aluminum line doesn't change: sharp, uncoated carbide, same as always.

PERFORMER ELITE TISAFLEX (AlTiN/TiSiXN) · by Oerlikon Balzers

Everything else. Steels, cast iron, stainless, titanium, high-temp alloys: one coating in place of two.

Changeover clearance
The changeover, honestly: every Alcrona EVO and Futura Nano tool on this page is changeover stock, and while it lasts it's 50% off, applied automatically at checkout. No code to enter: prices shown are list, the discount comes off at checkout, and it's an online-only deal. When it's gone, it's gone. The geometry isn't going anywhere: it comes back under Performer Elite, coated TISAFLEX.
Last run:won't be restocked
And a few slow movers (some uncoated Performer sizes, a handful of TISAFLEX) won't be restocked once they sell through. We'd rather put the carbide into tools that work for a living than tools that sit on a shelf. Still run one? We'll grind it for you as a custom: same geometry, made to order, kept on file.

And when any of these dull: every standard tool on this page regrinds off the published sheet, sharpened, recoated, back in the rack. That's the program.

See regrind pricing Get a Regrind Box

Ready to Ship

If it’s on this page, it’s on the shelf.

In-stock carbide, ground in Wichita. This collection only lists tools that are physically here. When one sells out, it drops off until it’s back. Need a SKU that isn’t showing? Browse the full catalog. Out of stock isn’t discontinued.

EM-1433750SQ carbide end mill | Star Tool Inc
$35.10 - $35.10
$35.10
$35.10 - $35.10
$35.10

1/4" x 3 Fl x 3" OAL x 3/4" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
14 in stock

Diameter - 1/4" Flutes - 3 Overall Length - 3" Length of Cut - 0.750" Radius - Square Corner Coating - Uncoated

$35.10 - $35.10
$35.10
$35.10 - $35.10
$35.10
EM-38331125SQ carbide end mill | Star Tool Inc
$61.96 - $61.96
$61.96
$61.96 - $61.96
$61.96

3/8" x 3 Fl x 3" OAL x 1-1/8" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3" Length of Cut - 1-1/8" Radius - Square Corner Coating - Uncoated

$61.96 - $61.96
$61.96
$61.96 - $61.96
$61.96
EM-12331250SQ carbide end mill | Star Tool Inc
$99.45 - $99.45
$99.45
$99.45 - $99.45
$99.45

1/2" x 3 Fl x 3" OAL x 1-1/4" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
14 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - Square Corner Coating - Uncoated

$99.45 - $99.45
$99.45
$99.45 - $99.45
$99.45
EM-516331250SQ carbide end mill | Star Tool Inc
$49.15 - $49.15
$49.15
$49.15 - $49.15
$49.15

5/16" x 3 Fl x 3" OAL x 1-1/4" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
13 in stock

Diameter - 5/16" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - Square Corner Coating - Uncoated

$49.15 - $49.15
$49.15
$49.15 - $49.15
$49.15
EM-34341625SQ carbide end mill | Star Tool Inc
$253.83 - $253.83
$253.83
$253.83 - $253.83
$253.83

3/4" x 3 Fl x 4" OAL x 1-5/8" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 3/4" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - Square Corner Coating - Uncoated

$253.83 - $253.83
$253.83
$253.83 - $253.83
$253.83
EM-14331250030 carbide end mill | Star Tool Inc
$42.60 - $42.60
$42.60
$42.60 - $42.60
$42.60

1/4" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
7 in stock

Diameter - 1/4" Flutes - 3 Overall Length - 3.00" Length of Cut - 1.250" Radius - .030 Coating - Uncoated

$42.60 - $42.60
$42.60
$42.60 - $42.60
$42.60
EM-58341625SQ carbide end mill | Star Tool Inc
$196.24 - $196.24
$196.24
$196.24 - $196.24
$196.24

5/8" x 3 Fl x 4" OAL x 1-5/8" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 5/8" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - Square Corner Coating - Uncoated

$196.24 - $196.24
$196.24
$196.24 - $196.24
$196.24
EM-1433750060 carbide end mill | Star Tool Inc
$37.60 - $37.60
$37.60
$37.60 - $37.60
$37.60

1/4" x 3 Fl x 3" OAL x 3/4" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 1/4" Flutes - 3 Overall Length - 3" Length of Cut - 0.750" Radius - .060 Coating - Uncoated

$37.60 - $37.60
$37.60
$37.60 - $37.60
$37.60
Star Tool Inc Coring Bit TCKWAY-025 TCKWAY-025
$50.05 - $50.05
$50.05
$50.05 - $50.05
$50.05

TCKWAY-025

Star Tool Inc
94 in stock

1/2" HSS Coring Bit (Legacy Part #KYC-020)

$50.05 - $50.05
$50.05
$50.05 - $50.05
$50.05
Star Tool Inc Coring Bit TCKWAY-028 TCKWAY-028
$50.05 - $50.05
$50.05
$50.05 - $50.05
$50.05

TCKWAY-028

Star Tool Inc
68 in stock

7/16" HSS Coring Bit (Legacy Part #KYC-019)

$50.05 - $50.05
$50.05
$50.05 - $50.05
$50.05
EM-383351500BN carbide end mill | Star Tool Inc
$83.81 - $83.81
$83.81
$83.81 - $83.81
$83.81

3/8" x 3 Fl x 3.5" OAL x 1-1/2" LOC w/ B/N | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 3/8" Flutes - 3 Overall Length - 3.5" Length of Cut - 1.500" Radius - Ball Nose Coating - Uncoated

$83.81 - $83.81
$83.81
$83.81 - $83.81
$83.81
EM-12331250BN carbide end mill | Star Tool Inc
$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95

1/2" x 3 Fl x 3" OAL x 1-1/4" LOC w/ B/N | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - Ball Nose Coating - Uncoated

$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95
EM-38331125BN carbide end mill | Star Tool Inc
$70.71 - $70.71
$70.71
$70.71 - $70.71
$70.71

3/8" x 3 Fl x 3" OAL x 1-1/8" LOC w/ B/N | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3" Length of Cut - 1.125" Radius - Ball Nose Coating - Uncoated

$70.71 - $70.71
$70.71
$70.71 - $70.71
$70.71
EM-34352250BN carbide end mill | Star Tool Inc
$344.10 - $344.10
$344.10
$344.10 - $344.10
$344.10

3/4" x 3 Fl x 5" OAL x 2-1/4" LOC w/ B/N | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 3/4" Flutes - 3 Overall Length - 5" Length of Cut - 2.250" Radius - Ball Nose Coating - Uncoated

$344.10 - $344.10
$344.10
$344.10 - $344.10
$344.10
EM-516331250BN carbide end mill | Star Tool Inc
$55.40 - $55.40
$55.40
$55.40 - $55.40
$55.40

5/16" x 3 Fl x 3" OAL x 1-1/4" LOC w/ B/N | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 5/16" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - Ball Nose Coating - Uncoated

$55.40 - $55.40
$55.40
$55.40 - $55.40
$55.40
EM-34441625SQ-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$277.78 - $277.78
$277.78
$277.78 - $277.78
$277.78

3/4" x 4 Fl x 4" OAL x 1-5/8" LOC w/ Square Corner & Futura Nano Coating | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 3/4" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - Square Corner Coating - TiAlN

$277.78 - $277.78
$277.78
$277.78 - $277.78
$277.78
Changeover clearance · Nano
EM-38331250030 carbide end mill | Star Tool Inc
$68.21 - $68.21
$68.21
$68.21 - $68.21
$68.21

3/8" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
10 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3.00" Length of Cut - 1.250" Radius - .030 Coating - Uncoated

$68.21 - $68.21
$68.21
$68.21 - $68.21
$68.21
EM-34541625160-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$290.28 - $290.28
$290.28
$290.28 - $290.28
$290.28

3/4" x 5 Fl x 4" OAL x 1-5/8" LOC w/ .160 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 3/4" Flutes - 5 Overall Length - 4.00" Length of Cut - 1.625" Radius - .160 Coating - Futura Nano

$290.28 - $290.28
$290.28
$290.28 - $290.28
$290.28
Changeover clearance · Nano
EM-14331250060 carbide end mill | Star Tool Inc
$42.60 - $42.60
$42.60
$42.60 - $42.60
$42.60

1/4" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 1/4" Flutes - 3 Overall Length - 3.00" Length of Cut - 1.250" Radius - .060 Coating - Uncoated

$42.60 - $42.60
$42.60
$42.60 - $42.60
$42.60
EM-1432625BN carbide end mill | Star Tool Inc
$31.35 - $31.35
$31.35
$31.35 - $31.35
$31.35

1/4" x 3 Fl x 2" OAL x 5/8" LOC w/ B/N | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 1/4" Flutes - 3 Overall Length - 2" Length of Cut - 0.625" Radius - Ball Nose Coating - Uncoated

$31.35 - $31.35
$31.35
$31.35 - $31.35
$31.35
EM-1233625030 carbide end mill | Star Tool Inc
$99.45 - $99.45
$99.45
$99.45 - $99.45
$99.45

1/2" x 3 Fl x 3" OAL x 5/8" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 0.625" Radius - .030 Coating - Uncoated

$99.45 - $99.45
$99.45
$99.45 - $99.45
$99.45
EM-12431250030 carbide end mill | Star Tool Inc
$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95

1/2" x 4 Fl x 3" OAL x 1-1/4" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
8 in stock

Diameter - 1/2" Flutes - 4 Overall Length - 3" Length of Cut - 1.250" Radius - .030 R Coating - Uncoated

$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95
EM-123351500120 carbide end mill | Star Tool Inc
$117.62 - $117.62
$117.62
$117.62 - $117.62
$117.62

1/2" x 3 Fl x 3.5" OAL x 1-1/2" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3.5" Length of Cut - 1.500" Radius - .120 Coating - Uncoated

$117.62 - $117.62
$117.62
$117.62 - $117.62
$117.62
EM-123351500060 carbide end mill | Star Tool Inc
$117.62 - $117.62
$117.62
$117.62 - $117.62
$117.62

1/2" x 3 Fl x 3.5" OAL x 1-1/2" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
18 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3.5" Length of Cut - 1.500" Radius - .060 Coating - Uncoated

$117.62 - $117.62
$117.62
$117.62 - $117.62
$117.62
EM-12331250030 carbide end mill | Star Tool Inc
$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95

1/2" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - .030 Coating - Uncoated

$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95
Star Tool Inc Router Bit TCRBIT-400-EC TCRBIT-400-EC
$15.50 - $15.50
$15.50
$15.50 - $15.50
$15.50

TCRBIT-400-EC

Star Tool Inc
60 in stock

1/8" Carbide Flush Trim Router Bit w/ Modified End

$15.50 - $15.50
$15.50
$15.50 - $15.50
$15.50
EM-3843625060-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$75.56 - $75.56
$75.56
$75.56 - $75.56
$75.56

3/8" x 4 Fl x 3" OAL x 5/8" LOC w/ .060 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 3/8" Flutes - 4 Overall Length - 3.00" Length of Cut - 0.625" Radius - .060 Coating - Futura Nano

$75.56 - $75.56
$75.56
$75.56 - $75.56
$75.56
Changeover clearance · Nano
EM-3833625BN carbide end mill | Star Tool Inc
$65.71 - $65.71
$65.71
$65.71 - $65.71
$65.71

3/8" x 3 Fl x 3" OAL x 5/8" LOC w/ B/N | Carbide End Mill

Star Tool Inc
9 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3.00" Length of Cut - 0.625" Radius - Ball Nose Coating - Uncoated

$65.71 - $65.71
$65.71
$65.71 - $65.71
$65.71
EM-38331250BN carbide end mill | Star Tool Inc
$71.96 - $71.96
$71.96
$71.96 - $71.96
$71.96

3/8" x 3 Fl x 3" OAL x 1-1/4" LOC w/ B/N | Carbide End Mill

Star Tool Inc
13 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3.00" Length of Cut - 1.250" Radius - Ball Nose Coating - Uncoated

$71.96 - $71.96
$71.96
$71.96 - $71.96
$71.96
EM-12331250060 carbide end mill | Star Tool Inc
$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95

1/2" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - .060 Coating - Uncoated

$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95
EM-12531250CHMF-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$113.90 - $113.90
$113.90
$113.90 - $113.90
$113.90

1/2" x 5 Fl x 3" OAL x 1-1/4" LOC w/ Corner Chamfer & Futura Nano Coating | Carbide End Mill

Star Tool Inc
7 in stock

Diameter - 1/2" Flutes - 5 Overall Length - 3" Length of Cut - 1.250" Radius - Corner Chamfer Coating - TiAlN

$113.90 - $113.90
$113.90
$113.90 - $113.90
$113.90
Changeover clearance · Nano
EM-34341625120 carbide end mill | Star Tool Inc
$263.83 - $263.83
$263.83
$263.83 - $263.83
$263.83

3/4" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .120 Coating - Uncoated

$263.83 - $263.83
$263.83
$263.83 - $263.83
$263.83
EM-516431250SQ carbide end mill | Star Tool Inc
$50.40 - $50.40
$50.40
$50.40 - $50.40
$50.40

5/16" x 4 Fl x 3" OAL x 1-1/4" LOC w/ Square Corner | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 5/16" Flutes - 4 Overall Length - 3" Length of Cut - 1.250" Radius - Square Corner Coating - Uncoated

$50.40 - $50.40
$50.40
$50.40 - $50.40
$50.40
EM-516431250SQ-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$64.00 - $64.00
$64.00
$64.00 - $64.00
$64.00

5/16" x 4 Fl x 3" OAL x 1-1/4" LOC w/ Square Corner & Futura Nano Coating | Carbide End Mill

Star Tool Inc
7 in stock

Diameter - 5/16" Flutes - 4 Overall Length - 3" Length of Cut - 1.250" Corner Radius - Square Corner Coating - TiAlN

$64.00 - $64.00
$64.00
$64.00 - $64.00
$64.00
Changeover clearance · Nano
EM-58441625SQ-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$213.64 - $213.64
$213.64
$213.64 - $213.64
$213.64

5/8" x 4 Fl x 4" OAL x 1-5/8" LOC w/ Square Corner & Futura Nano Coating | Carbide End Mill

Star Tool Inc
11 in stock

Diameter - 5/8" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - Square Corner Coating - TiAlN

$213.64 - $213.64
$213.64
$213.64 - $213.64
$213.64
Changeover clearance · Nano
EM-3833625030 carbide end mill | Star Tool Inc
$61.96 - $61.96
$61.96
$61.96 - $61.96
$61.96

3/8" x 3 Fl x 3" OAL x 5/8" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3.00" Length of Cut - 0.625" Radius - .030 Coating - Uncoated

$61.96 - $61.96
$61.96
$61.96 - $61.96
$61.96
EM-38331250060 carbide end mill | Star Tool Inc
$68.21 - $68.21
$68.21
$68.21 - $68.21
$68.21

3/8" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .060 R | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 3/8" Flutes - 3 Overall Length - 3.00" Length of Cut - 1.250" Radius - .060 Coating - Uncoated

$68.21 - $68.21
$68.21
$68.21 - $68.21
$68.21
EM-34552250060-AlCrN carbide end mill | Star Tool Inc
Changeover clearance · EVO
$371.50 - $371.50
$371.50
$371.50 - $371.50
$371.50

3/4" x 5 Fl x 5" OAL x 2-1/4" LOC w/ .060 R & Alcrona EVO Coating | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 3/4" Flutes - 5 Overall Length - 5.00" Length of Cut - 2.250" Radius - .060 Coating - Alcrona EVO

$371.50 - $371.50
$371.50
$371.50 - $371.50
$371.50
Changeover clearance · EVO
EM-34541625160-AlCrN carbide end mill | Star Tool Inc
Changeover clearance · EVO
$290.28 - $290.28
$290.28
$290.28 - $290.28
$290.28

3/4" x 5 Fl x 4" OAL x 1-5/8" LOC w/ .160 R & Alcrona EVO Coating | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 3/4" Flutes - 5 Overall Length - 4.00" Length of Cut - 1.625" Radius - .160 Coating - Alcrona EVO

$290.28 - $290.28
$290.28
$290.28 - $290.28
$290.28
Changeover clearance · EVO
EM-1233625120 carbide end mill | Star Tool Inc
$99.45 - $99.45
$99.45
$99.45 - $99.45
$99.45

1/2" x 3 Fl x 3" OAL x 5/8" LOC w/ .120 R | Carbide End Mill

Star Tool Inc
2 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 0.625" Radius - .120 Coating - Uncoated

$99.45 - $99.45
$99.45
$99.45 - $99.45
$99.45
EM-12331250090 carbide end mill | Star Tool Inc
$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95

1/2" x 3 Fl x 3" OAL x 1-1/4" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
5 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 3" Length of Cut - 1.250" Radius - .090 Coating - Uncoated

$101.95 - $101.95
$101.95
$101.95 - $101.95
$101.95
EM-12341625030 carbide end mill | Star Tool Inc
$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81

1/2" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 1/2" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .030Â Coating - Uncoated

$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81
EM-12441625090 carbide end mill | Star Tool Inc
$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81

1/2" x 4 Fl x 4" OAL x 1-5/8" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
11 in stock

Diameter - 1/2" Flutes - 4 Overall Length - 4" Length of Cut - 1.625" Radius - .090 Coating - Uncoated

$129.81 - $129.81
$129.81
$129.81 - $129.81
$129.81
EM-58341625030 carbide end mill | Star Tool Inc
$201.24 - $201.24
$201.24
$201.24 - $201.24
$201.24

5/8" x 3 Fl x 4" OAL x 1-5/8" LOC w/ .030 R | Carbide End Mill

Star Tool Inc
Only 1 left!

Diameter - 5/8" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - .030 Coating - Uncoated

$201.24 - $201.24
$201.24
$201.24 - $201.24
$201.24
EM-58341625BN carbide end mill | Star Tool Inc
$208.74 - $208.74
$208.74
$208.74 - $208.74
$208.74

5/8" x 3 Fl x 4" OAL x 1-5/8" LOC w/ B/N | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 5/8" Flutes - 3 Overall Length - 4" Length of Cut - 1.625" Radius - Ball Nose Coating - Uncoated

$208.74 - $208.74
$208.74
$208.74 - $208.74
$208.74
EM-38431125090-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$80.56 - $80.56
$80.56
$80.56 - $80.56
$80.56

3/8" x 4 Fl x 3" OAL x 1-1/8" LOC w/ .090 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
6 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 4 Length of Cut - 1.125" Radius - .090 Coating - TiAlN

$80.56 - $80.56
$80.56
$80.56 - $80.56
$80.56
Changeover clearance · Nano
EM-58541625060-TiAlN carbide end mill | Star Tool Inc
Changeover clearance · Nano
$221.14 - $221.14
$221.14
$221.14 - $221.14
$221.14

5/8" x 5 Fl x 4" OAL x 1-5/8" LOC w/ .060 R & Futura Nano Coating | Carbide End Mill

Star Tool Inc
3 in stock

Diameter - 5/8" Flutes - 5 Overall Length - 4" Length of Cut - 1.625" Radius - .060 R Coating - TiAlN

$221.14 - $221.14
$221.14
$221.14 - $221.14
$221.14
Changeover clearance · Nano
EM-384351500090 carbide end mill | Star Tool Inc
$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

3/8" x 4 Fl x 3.5" OAL x 1-1/2" LOC w/ .090 R | Carbide End Mill

Star Tool Inc
4 in stock

Diameter - 3/8" Flutes - 4 Overall Length - 3.5" Length of Cut - 1.500" Radius - .090 Coating - Uncoated

$80.06 - $80.06
$80.06
$80.06 - $80.06
$80.06

Don't see the tool you need?

This page is only what's on the shelf today. It's not everything we grind, not even close.

Out of stock ≠ gone

Browse the full catalog

Every SKU we grind, including what's out of stock right now. These tools are made here in Wichita, so an empty shelf is a timing problem, not a dead end. Find your spec and ask.

See the full catalog →

Not in the catalog at all

Have the exact tool ground

Send a print, a sketch, or the tool itself. We grind the exact one, keep it on file for reorders, and quote its regrind price up front, on the original quote. One tool is a real order.

Send a print →