Skip to content
New tools on the shelf. Dull tools reground. What's a regrind cost? Run your numbers →
New tools on the shelf. Dull tools reground. What's a regrind cost? Run your numbers →
EM-1432625030 carbide end mill | Star Tool Inc

1/4" x 3 Fl x 2" OAL x 5/8" LOC w/ .030 R | Carbide End Mill

$30.10 - $30.10
$30.10
$30.10 - $30.10
$30.10
SKU EM-1432625030
Ø 1/4″3 FL2.00″ OAL0.625″ LOC.030 RUNCOATED
Availability:
3 in stock, ready to be shipped

Dull isn't dead.

This end mill sharpens for $11.25, off the same published sheet every regrind we run rides. When it dulls, it doesn't owe you another $30. It owes you a trip back to Wichita.

Do that 3 times (3 is the conservative count) and one purchase turns into 4 sharp tools for $63.85, instead of $120.40 buying new every time. That's 47% off the life of the tool.

Send it in with the rest of your dull tools. You give the go-ahead, we get to work, and it comes back sharp.

All-in: cut-off of damaged ends, end type, flute count, all in the one price. And any brand rides the same sheet, not just ours.

See how regrinds work Regrind pricing →
lives left in it
REGRIND MATH: THIS TOOL
New, off the shelf$30.10
Sharpen: Ø 1/4″ end mill$11.25
Back in your spindle$11.25
OVER ITS LIFE: 3 REGRINDS, THE CONSERVATIVE COUNT
4 sharp tools, buying new every time$120.40
4 sharp tools, this one reground ×3$63.85
Stays in your shop: 47% saved$56.55
PULLED FROM THIS TOOL'S SPECS · PUBLISHED RATES · STANDARD TOOLS · MOST TOOLS REGRIND 3–5×. WE COUNT 3

Almost the right tool? We grind the exact one.

Different radius, longer flutes, a step, a tolerance the catalog won't hold: if this tool is close but not quite, don't shim the job to fit the tool. Send a print. Or a sketch. Or the worn-out tool you've been babying. Ground here in Wichita, and one tool is a real order.

A Star Tool special isn't disposable, either: it goes on file, so reorders are a PO number, and it comes back through the same regrind service as everything else, with its regrind price quoted up front, on the original quote.

Send a print How custom works →
one tool = a real order
THIS TOOL, YOUR WAY
Ø 1/4″→your diameter
3 FL→your flute count
0.625″ LOC→your length of cut
.030 R→your corner
UNCOATED→your coating
Ground to your print, in Wichitaon file ✓