Skip to content
The Regrind Box standard: any brand, back sharp in 14 business days. Get your free box. Run your numbers →
The Regrind Box standard: any brand, back sharp in 14 business days. Get your free box. Run your numbers →
EM-38531125090-AlCrN carbide end mill | Star Tool Inc

3/8" x 5 Fl x 3" OAL x 1-1/8" LOC w/ .090 R & Alcrona EVO Coating | Carbide End Mill

Changeover clearance · EVO
$85.56 - $85.56
$85.56
$85.56 - $85.56
$85.56
SKU EM-38531125090-AlCrN
Ø 3/8″5 FL3.00″ OAL1.125″ LOC.090 RALCRONA EVO
Availability:
7 in stock, ready to be shipped

Dull isn't dead.

This end mill sharpens and recoats for $28.00, off the same published sheet every regrind we run rides. When it dulls, it doesn't owe you another $86. It owes you a trip back to Wichita.

Do that 3 times (3 is the conservative count) and one purchase turns into 4 sharp tools for $169.56, instead of $342.24 buying new every time. That's 50% off the life of the tool.

Drop it in a Regrind Box with the rest of your dull tools. You give the go-ahead, the clock starts: sharp tools back within 14 business days. That's the Regrind Box standard.

All-in: cut-off of damaged ends, end type, flute count, all in the one price. Fresh coating by Oerlikon Balzers, EVO or TISAFLEX, one price either way. And any brand rides the same sheet, not just ours.

Get a Regrind Box Regrind pricing →
lives left in it
REGRIND MATH: THIS TOOL
New, off the shelf$85.56
Sharpen: Ø 3/8″ end mill$13.25
Recoat: 3/8″ × 3″ OAL · EVO or TISAFLEX$14.75
Back in your spindle$28.00
OVER ITS LIFE: 3 REGRINDS, THE CONSERVATIVE COUNT
4 sharp tools, buying new every time$342.24
4 sharp tools, this one reground ×3$169.56
Stays in your shop: 50% saved$172.68
PULLED FROM THIS TOOL'S SPECS · PUBLISHED RATES · STANDARD TOOLS · MOST TOOLS REGRIND 3–5×. WE COUNT 3

Almost the right tool? We grind the exact one.

Different radius, longer flutes, a step, a tolerance the catalog won't hold: if this tool is close but not quite, don't shim the job to fit the tool. Send a print. Or a sketch. Or the worn-out tool you've been babying. Ground here in Wichita, and one tool is a real order.

A Star Tool special isn't disposable, either: it goes on file, so reorders are a PO number, and it comes back through the same Regrind Box as everything else, with its regrind price quoted up front, on the original quote.

Send a print How custom works →
one tool = a real order
THIS TOOL, YOUR WAY
Ø 3/8″→your diameter
5 FL→your flute count
1.125″ LOC→your length of cut
.090 R→your corner
ALCRONA EVO→your coating
Ground to your print, in Wichitaon file ✓